Koha for windows free download free

Looking for:

Koha for windows free download free. Installing Koha on Windows XP

Koha-related documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies.

Include a copyright notice and at least a pointer to the license used. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions. No liability for the contents of this document can be accepted. Use the concepts, examples and information at your own risk.

There may be errors and inaccuracies that could be damaging to your system. Although this is highly unlikely, proceed with caution; the author s do not take any responsibility. All copyrights are held by their respective owners, unless specifically noted otherwise. Use of a term in this document should not be regarded as affecting the validity of any trademark or service mark.

Naming of particular products or brands should not be seen as endorsements. Yes, it is possible to install and run Koha on a Windows platform. All three of these supporting programs have distributions for Windows and are not hard to install. And they are all available without cost, just like Koha.

A Windows install package is available for Koha that installs all the Koha files to the proper locations, installs required Perl modules, and handles necessary basic configuration to be able to run Koha with sample data. If you are willing to read and follow some simple instructions, it’s not very difficult. To be clear, it is not yet as simple as a single install. But it no harder than installing on a Linux box. You need to perform four separate installations as follows:.

Detailed instructions are provided for each install. Carefully follow the instructions as you do each install, and you should end up with a working version of Koha running with sample data. Each of the four installs provides an uninstall option. If you evaluate Koha and decide it’s not for you, you can uninstall it from your system. The basic program runs fine on Windows.

However, there is one important feature that doesn’t work yet. The Z This is due to a required underlying Event module that hasn’t been successfully ported to Windows yet.

There may be a work-around, but it hasn’t been tested. See the ‘Want to Help? We’d like to make the following improvements to Koha on Windows. Can you help us figure out to do any of the following?

If so, please submit the solution to koha-win32 AT lists. Get the Z Do you know how to make Koha function when Perl is installed to some other location? I don’t think symlinks are supported on Windows. Improve the sample data set included with the install. Or provide a sample data set in another language. Two of the required supporting programs are supplied as Windows Installer. The Windows Installer engine must be present in the operating system before a Windows Installer.

If you are installing on Windows 98, do not use V2. See KohaWin Installation for install instructions. The older version 3 has been around for quite some time and version 4 was released this spring The Koha windows install has been tested with both versions, so either one should be ok.

The recommended install package that you should download is mysql Look under the Windows downloads section for V4. Some newer alpha or development releases may be available, but you should stick with a stable production release and not try an alpha release. Click the download link. You will be asked to register, but note that registration is NOT required to download – you can choose to skip it.

The Koha W32 install packages now include the necessary Perl modules for both V5. See KohaWin Installation for detailed install instructions. It is not necessary to download any additional Perl modules. The Koha W32 installs include all necessary Perl modules for both V5. Koha W32 install packages are available for both a V1 stable production release and a V2 pre-release that still has some bugs, but is not far from a stable release.

The V1 release probably won’t be supported much longer, so your best choice is probably the V2 prerelease, especially if you just want to do a trial installation to check out Koha’s capabilities. Koha V1. It is recommended that you try the latest release of Koha V2. Koha V2. On Windows 98, you will have to manually start Apache in a console window.

There are usually two or more versions of Koha available for download. Some versions are stable release versions intended for actual production use. Others are release candidates beta test versions intended for testing new features and helping the developers with debugging. Take time to review the release notes and choose the version you want to test.

Evaluate Koha on a test machine, not on a production server. Even if you choose a stable version of Koha, the Windows install package referenced on these pages is still under development and should be considered a beta version. It is important at least for now that you install each of the following applications to the specified path if you want to be sure Koha will work without doing a lot of extra manual configuration. But for now, it may only work as specified.

This is due to a required underlying Perl Event module that hasn’t been successfully ported to Windows yet. See the ‘ Want to Help? See KohaWin Downloads page for download links for all necessary programs.

If you are not sure, just try doing Step 2. If it doesn’t work, you need Step 1. Network Domain e. If not part of a domain, you can enter ‘ mydomain ‘ or some other text – it should not make a difference if you are running Koha on a stand-alone computer. For the Server name, enter the fully qualified domain name of your computer if it is part of a domain. Otherwise, enter your computer name without the www. If you’re not sure, make something up and the Koha install should correct it for you.

For the Administrator’s email address, enter an email address. I don’t think the email address is used by Koha. On the same dialog you’ll also have a choice of ‘for All users on port In all my testing, I chose the former, which is the default. Let the install complete and reboot if asked to do so. Choose a Typical Install. Run the file you downloaded. Accept the default settings on the rest of the install dialogs. It is not necessary to install any additional Perl modules. The Koha Windows install includes the necessary Perl modules and will do that for you.

If you have previously installed Koha using an install package provided here, consider uninstalling the old version especially if it was a test version before installing a newer version. First, stop the MySQL server and make a backup of any data you want to keep. It is possible to install more than one version at a time and switch between them – see KohaWin Configuration for details. Run the Koha Windows install. If you get an error message about any of the required programs, it would be best to cancel the Windows Koha install and correct the problem before continuing.

After a couple information dialogs, you’ll be asked if you want to do a Full or Custom Install. You should choose to do a Full Install unless you are an experienced user and plan to manually configure all the programs to work together. On the Backup Replaced Files dialog, make a note of where backup files will be stored in case you need to access them. Continue and allow the install to complete. On Windows 98, be sure to reboot your computer when the installs are finished.

If the traffic light is green, the database is running. You should get a DOS console window that needs to stay open but can be minimized. If the console window disappears after a brief moment, there is some problem with your Apache configuration. If you chose to do a full install of Koha, you should have two icons in your System Tray – one a Feather and the other a Traffic Light.

Koha – CNET Download

Note It is possible to install more than one version at a time and switch between them – see KohaWin Configuration for details. If you get an error message about any of the required programs, it would be best to cancel the Windows Koha install and correct the problem before continuing. After a couple information dialogs, you’ll be asked if you want to do a Full or Custom Install. You should choose to do a Full Install unless you are an experienced user and plan to manually configure all the programs to work together.

On the Backup Replaced Files dialog, make a note of where backup files will be stored in case you need to access them. Continue and allow the install to complete. If the traffic light is green, the database is running. You should get a DOS console window that needs to stay open but can be minimized.

If the console window disappears after a brief moment, there is some problem with your Apache configuration. You can access the Apache Service Monitor by right clicking on the feather. You can use the Apache Monitor to start, stop, or restart the Apache server. If the Traffic Light is green and the feather has a green arrow rather than a red dot in the small white circle, then both MySQL and Apache are running and you should be ready to run Koha.

Start your browser and access Koha. UnInstall Instructions If you evaluate Koha, and decide it’s not for you, or if any of these installs causes problems with your computer, you can uninstall them using normal Windows procedures. See the above website for a full list of features. This program was freeware when I added it to this list, but has now gone Shareware. Not quite as powerful as SQLyog, but a little easier to use. Note This program is no longer supported by its author, but it can still be obtained from the above page by clicking the download link in the upper right corner.

It doesn’t seem to work correctly on Windows NT, but does work on most other Windows versions. If you’re trying to transfer data from another library system to Koha via a delimited text file, this utility can help.

KohaWin Configuration Important config files, installing more than one Koha version and switching between versions, switching between Koha databases. Important Configuration Files The following are important configuration files that affect the operation of Koha. You need to be aware of these files if you want to do any customization of settings from the standard windows install: httpd.

If you followed the install instructions on these pages, you will find httpd. More details coming soon It tells Koha which database to use, and the location of all the files for the Koha program. If you followed the install instructions on these pages, you will find koha. You should find my. Note that each database gets its name from the name of the subfolder in which its files are stored.

Installing Multiple Versions of Koha for testing or evaluation The Windows install package for Koha was written to make it possible to install more than one version of Koha on a single machine and then switch between them.

This can be handy for someone who wants to evaluate both the current stable release of Koha as well as the latest test release. Or it could be useful for someone who wants to switch versions to assist the Koha development team with debugging and testing.

Now of course, each time you install a version of Koha, it makes changes to all of the configuration files listed in the Important Configuration Files section above to point everything to the latest version that is installed. However, once multiple versions are installed, it is possible to switch between them by simply swapping a couple of the configuration files and then restarting the Apache webserver.

If you’d rather not worry about the details of what needs to be swapped, you can use a little utility included in the W32 Koha installs any installs dated July 1, or later that will make the changes for you.

You don’t need to run this utility every time you start Koha. Once you set a default version, it will remain in effect until you run this utility again and change the version.

Do not use decimal points in the version numbers. Remember, the version change will not take effect until you restart the Apache webserver. On Windows 98, you need to restart it manually. Details on what takes place when you run the above utility to switch versions The two configuration files that need to be swapped to switch versions are httpd. To make it easy to switch version, a version specific copy of each of these configuration files is installed.

For example, if you have installed Koha V1. The actual file named koha. To switch versions, the contents of koha. At the same time, koha. The actual file that is used by Apache is httpd. To switch versions, the contents of httpd. The Apache webserver needs to be restarted before the change will take effect. The above utility automates the above process. But you should understand what’s happening because if you need to customize the configuration of either koha.

Apache Internal Server Error You can troubleshoot internal server errors by looking at the Apache error log files. Open these files in notepad or another text editor and you should find some helpful information about your error. If you have trouble opening the log file because it is locked, make a copy of it first and then open the copy. Scroll all the way to the end of the file to see the most recent errors.

See if you can figure out the error from the information given in the error log. Note that Apache logs even minor errors, so don’t be surprised if you find lots of entries. If you need help, post just the last three or four lines of the error log to the koha-win32 mailing list, and we’ll see if we can help. To keep things simple, the Windows install assumes you are setting up a stand-alone Koha test server and uses an IP address of When you type OPAC as the address it also resolves to Troubleshooting ideas: 1.

Were you logged in as a local administrator when you did the install? If not, the install probably could not modify your hosts file. Reinstall Koha as a local admin or manually add the above two lines to your hosts file. Figure 32 1.

Figure 34 1. Tick the check box next to I accept the terms in the License Agreement. Here you should change the location of installation leaving the rest of the settings as they are.

To change the location click on the Browse button, a new window popup window will open. Figure 36 1. Figure 38 1. Leave the settings as they are and click Next. If you are sure you have customized the installation as you needed it click on the Install button. The installation will start. Figure 40 1. EXE 1. Figure 44 1. It will check for all the supporting applications. Figure 45 1. If it shows some warns about some of the supporting applications Cancel the installation rectify the problem.

If everything is in order click Next. Click I Agree. Figure 47 1. Read the warning message carefully and click Next. All the information related to the current release is provided here. If interested go through it and then click Next. Figure 49 1. For new users the default setting Full installation is recommended. However if you are well versed with KOHA and are installing on your production server you can choose Custom installation and make your choices.

The default selection is MARC21 and we are going to use it for our purpose. Figure 51 1. Yaz Toolkit is an external toolkit that has been integrated with KOHA and we need to separately agree the license terms.

Figure 53 1. It will show the installation progress. Let the installation complete. Figure 55 1. Click Yes. Here the process of Unpacking, Generating and Updating of files will be enumerated. Figure 57 1. After all the files have been installed installer will try to connect to the MySQL database.

In case it is not able to establish a connection it will ask you to setup the connection manually. It will open a dialogue box where you need to enter the password for root user. Once connected the Installation Complete dialogue box will open. It is necessary. So click OK. Open any of the web browser you are using.

But Android emulators allow us to use all these apps on PC as well. So even if the official version of Koha-Opac for PC not available, you can still use it with the help of Emulators. Here in this article, we are gonna present to you two of the popular Android emulators to use Koha-Opac on PC.

Bluestacks is one of the coolest and widely used Emulator to run Android applications on your Windows PC. Bluestacks software is even available for Mac OS as well.

Now you can just double click on the app icon in bluestacks and start using Koha-Opac app on your laptop. You can use the app the same way you use it on your Android or iOS smartphones. However, using the standard method to Install any android applications is recommended. The latest version of Bluestacks comes with a lot of stunning features.

Bluestacks4 is literally 6X faster than the Samsung Galaxy J7 smartphone. You need to have a minimum configuration PC to use Bluestacks.